Blackstone PRO Serie Manual Del Propietário página 7

Model 1948
ASSEMBLY INSTRUCTIONS
Please read all instructions thoroughly before proceeding. Ensure
that all plastic packing material and any transit protection is removed
before assembling.
Find a large, clean area to assemble your unit. Please refer to the parts list and
assembly diagrams as necessary.
S T E P 0 1
Remove the joint leg
assembly from the packaging.
Loosen the four (4) screws and sepa-
rate the left and right leg assemblies.
S T E P 0 2
Use three (3) M4x10 (h.) screws to install the left leg assembly to
the bottom panel.
Assembly Guide | Owner's Manual
! !
WA r n i n G WA r n i n G
• Do not mix old and new The manufacturer has made
every effort to eliminate any batteries.
sharp edges. However, you
• Do not mix alkaline, stan-
should handle all compo-
dard (carbon-zinc) or
nents with care to avoid
rechargeable (ni-cad, ni-mh,
accidental injury.
etc.) batteries.
Some parts may contain
sharp edges, especially as
noted in these instructions.
Wear protective gloves if
necessary.
!
WA r n i n G
The use of alcohol, prescrip-
tion or non-prescription
!
WA r n i n G
drugs may impair the
consumer's ability to prop-
• Do not mix old and new
erly assemble or safely
batteries.
operate the appliance.
• Do not mix alkaline, stan-
dard (carbon-zinc) or
!
C A u T i o n
rechargeable (ni-cad, ni-mh,
etc.) batteries.
Two people are recom-
mended for the assembly of
this product.
blackstoneproducts.com/support
AS
Plea
the
Find
asse
05