The ULTRA WASH
®
Soil Removal System gives you sparkling
clean dishes, while using less energy and time. The ULTRA
®
WASH
Soil Removal System includes:
■
A Triple Action Filtration system that intermittently filters soil
from the wash water, thus eliminating the need to scrape
dishes.
Before using your dishwasher, remove all packaging materials.
Read this entire Use and Care Guide. You will find important
safety information and useful operating tips.
Using Your New Dishwasher
1. Rinse aid is essential for good drying. Be sure to fill the
dispenser before you use your new dishwasher. Each filling
will last about 1 to 3 months depending on your usage.
2. Scrape large food soil and hard items (toothpicks or bones)
from dishes.
3. Properly load the dishwasher. (See "Dishwasher Loading.")
Load dishes with space in between so water will reach the
soiled surfaces. Make sure nothing keeps the spray arm(s)
from spinning freely.
®
ULTRA WASH
Soil Removal System
START-UP GUIDE
■
An Automatic Temperature Control (ATC) that ensures the
proper water temperature for the selected wash cycle, dish
load size, and soil level of the load.
4. Add detergent. Always use a high-quality brand detergent.
(See "Dishwasher Use.")
MAIN WASH
5. Push door firmly closed. The door latches automatically.
6. Run hot water at the sink nearest your dishwasher until the
water is hot. (See "Dishwasher Efficiency Tips.") Turn off
water.
7.
Select the desired cycle and options.
8. Press START/RESUME, or press START/RESUME to repeat
the same cycle and options as the previous cycle.
IMPORTANT: The Start/Resume light will flash if the door is
opened during a cycle. Power interruptions during a cycle
may also cause the Start/Resume light to flash. Press START/
RESUME to continue a cycle.
PRE-
WASH
7