Publicidad
Idiomas disponibles
Idiomas disponibles
It is normal for the recharger to get warm whilst charging. Charge the batteries at an
ambient temperature between 10° - 35° C / 50° - 95° F. The storage temperature should
not exceed 50° C / 122° F otherwise the batteries could be damaged.
BATTERY CARE
Excessive charging is prevented by the charging control in the batteries.
Occasional insufficient recharging (less than 4 hours) does not harm the batteries.
However, frequent insufficient charging over a period of weeks does result in a
reduction of the performance capacity. Completely charge the batteries to increase the
performance capacity. Completely discharging the batteries insures extremely efficient
utilization. If this is not done regularly, the charging capability will also be impaired.
To increase the performance capacity of the batteries, completely charge them, and
completely discharge them. Charging can be interrupted. However, the longer the
interruption e.g. a week or a month, the more important it is to completely discharge and
charge the batteries as recommended.
Fully charge the batteries every 3-6 months to prolong the battery life.
USING FOR THE FIRST TIME
Cut the insole to the size of your foot. Follow the instructions on the insole. Do not cut
the heating element or the battery. The cutting marks serve as a guide. Place insoles
into shoes.
GETTING STARTED:
Connect the insoles with the APP: download the free APP
1. Press the button on the heated insole for about 3 seconds to turn it on.
The red LED on the insole will light up. Repeat with the second insole.
2. Activate Bluetooth on your phone, then open the APP.
3. In the APP: select insoles in the main overview of products
4. In the APP: click on the blue blinking Bluetooth connection icon on the insoles
5. In the APP: select the correct insole (left and/or right)
6. Now the insoles are connected with your APP
7. Click the heat level button in the APP to change the temperature, or press the
button on the insole to change the temperature.
8. Click the on/off button in the APP to turn into stand-by mode, LEDs blink.
9. The blinking lights in stand-by mode, show the battery status level
(red light blinking = 0-33% charged; yellow light blinking = 34-66% charged,
green light blinking = 67-100% charged)
10. To turn off the insoles completely for storage, press the on/off button on each insole.
This will turn the insoles on (red light shining). Press on on/off button on each insole
again, the lights will go out completely and the insoles are turned off.
CAUTION!
•
If you know that you sometimes experience loss of sensation, consult your doctor
before using the product.
•
Stop using if your skin turns red. Excessive exposure to heat can lead to burns.
•
Only use the charger supplied to charge the batteries
•
Do not open or damage the batteries.
•
Do not throw batteries into open fire. Dispose of used batteries properly.
•
Do not modify the product or use it for any purpose other than intended.
•
Repairs and modifications are only to be carried out by the manufacturer,
his service agents or similarly qualified persons in order to avoid any hazard.
EN
DE
SK
PL
SI
HR
SE
LV
FR
CZ
NL
FI
IT
RU
ES
NO
HU
RS
RO
5
Publicidad
