Publicidad
Idiomas disponibles
Idiomas disponibles
4. Adjust the length adjustment bars for the chosen orientation.
4-1. Adjust the height-adjustment brackets.
Normal Type
4-2. Assemble the length adjustment bars on to the two wall mount brackets using screws.
D
5. Place the assembly against the wall you wish to mount it on to and then mark the anchor insertion points on the wall.
6. Insert the anchors and screws where marked.
E
[ Installing on a drywall with stud reinforcements
Installation Requirements
• Check the location of the studs and then insert the screws.
• Minimum Stud Size: 51 mm x 102 mm (2 inch x 4 inch), Predrill 3 mm holes before inserting the screws.
• The holes must be drilled along the center axis of the studs.
• Inserting the screws without predrilling can split the studs.
[ Manufacturer will not be responsible for any issue arising from your failure to follow these installation instructions.
F
9 mm (0.3ʺ)
65 mm (2.5 )
E
3 mm (0.1 )
3 mm (0.1 )
15 mm
Slim Type (remove 4 height-adjustment brackets.)
65 mm (2.5ʺ)
65 mm (2.5 )
65 mm (2.5 )
3 mm (0.1 )
English - 3
Publicidad
