Publicidad
Idiomas disponibles
Idiomas disponibles
BASIC OPERATION OF THE CONSOLE
IGNITION OF THE SCOOTER
•
There is no default password. Press and hold the switch
•
After turning it on, press
turn off the lights.
ADJUSTMENTS
•
The user can make the desired settings through the following buttons:
-
Press
-
Briefly press
-
Press briefly
•
Password setting: After switching on, press
or
to
. The speed area will show "HI", briefly press
or
to select the code. 5 digits are recommended. Then press briefly
password; press briefly
•
Password Cancellation: Enter the setting mode and move the cursor to
curso
for the speed display to indicate "Lo", press briefly
•
Adjusting the backlight: Enter the setting mode and move the cursor to "POWER", press
to adjust the brightness. The icon
desired brightness.
•
Startup Adjustment: Enter the configuration mode and move the cursor to
to adjust the start speed (this means that at level 0 the scooter will start when stopped and at higher levels the
scooter will start at a certain speed). The icon
the desired speed.
•
Auto power off setting: the default power off time is 3 minutes (the screen shows 0:03). In the configuration
mode, you can press
and press
or
no automatic shutdown.
•
Switch speed: press briefly
speed).
•
Cruise operation: Press
for 2 seconds to maintain the driving force and then release it. If you want more motive power, then continue
pressing the accelerator for two seconds like the previous time. With the cruising mode activated, the brakes are
used as usual (the index finger pressing the front handle downwards). To return to cruise mode after braking, press
the accelerator button for 2 seconds and it will be reactivated. Press briefly
•
Mileage reset: In the no driving state, press
displayed. Press
(ODO). Press long
•
Restore factory settings: Restore factory settings: When the scooter is switched off, press and hold
and the LCD display driver will show
and
together to enter or exit the configuration.
or
to move the cursor or change the setting value.
to select and confirm settings.
to save.
or
until the lower display counter dials 0:03, and then press
to adjust according to your needs, to confirm the setting press
to change the speed:
and the screen will show
and
together for 5 seconds to reset. Press
and
together for 5 seconds to reset the accumulated mileage (ODO).
for 3 seconds until the console turns on.
(luci posteriori accese). Press again
and
together to start the setting; and move the cursor using
to adjust and then move the cursor with
2 times and the password will be canceled.
(8 levels) shows the level on the screen, press
(8 levels) shows the speed level, press
(low),
to enter cruise mode. Press and hold the accelerator
to the mileage position where the unique mileage (TRIP) is
38
, the system will ask you to repeat the
, press
to select and move the
and hold
to confirm the
press
and press
briefly to select,
. 0:00 means there is
(medium) or when flashing
to exit cruise mode.
and display the accumulated mileage
to
or
or
to confirm
(high
,
,
.
Publicidad
