Publicidad
Idiomas disponibles
Idiomas disponibles
56
STEP 4: ATTACH THE HANDLES
1.
Connect the handles to the control valve using pin Ø5x26 (nº83), cotter pin Ø2x10 (nº84), Allen screw
M8x16 (nº81) and lock washer Ø8 (nº57).
STEP 5: ATTACH THE LOG HOLDER AND FENDER
1.
Fasten the trunk support (nº53 and nº88) using hex bolt M8x25 (nº69), flat washer Ø8 (nº37), nylon lock nut
M8 (#38). Pull the keychain to rotate the log base A (nº88) or remove it.
2.
Attach the mudguards (nº89 and nº90) to the hydraulic reservoir using the hexagon bolt M8x25 (nº69), the
flat washer Ø8 (nº37), the flat washer Ø8 (nº57) and the hexagon nut M8 (nº38).
69
69
37
57
38
81 57
88
37
38
87
102
89
84
83
53
90
Publicidad
