Whittier Wood Furniture Mission Serie Instrucciones Para Armar página 4

H
Eb
Fig. 3
3. Spread a thin layer of glue in the holes of the Right and Left Legs (Eb and Fb). Place the Legs at the
corners of the Shelf Assembly as shown in Figure 3. The drilled corners of the legs should face the
corner braces. Insert the dowels into the holes on the legs and gently tap into place using a mallet or
padded hammer. Wipe up any excess glue with a damp rag. Using the predrilled holes as guides,
secure the legs to the Shelf Assembly with #8x1-1/4" Pan Screws (H). See Figure 3.
J
I
4. Insert a 3/8"x2-1/2" Hex Bolt (I) with a Washer (J) through the corner block and into the leg and
fasten securely. Repeat for the other three legs. See figures 4 and 4a.
5. Turn the table upright and insert the Drawer (KK).
Page 4 – 314Wb/316Wb/318Wb/319Wb – 04/10
Fb
H
Fb
I
Eb
H
Fig. 4a
J
I
Fig. 4
x 4
x 4
J x 4