Publicidad
Idiomas disponibles
Idiomas disponibles
and safer at the rate for which it is designed.
b.
Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch
is dangerous and must be repaired.
Disconnect battery pack from tool or place the switch in the locked or off position before
c.
making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
d.
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the
hands of untrained users.
e.
Maintain power tools and accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
f.
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these
g.
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result in a
hazardous situation.
h.
Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations.
i.
When battery pack is not in use, keep it away from other metal objects like: paper clips, coins,
keys, nails, screws, or other small metal objects that can make a connection from one terminal
to another. Shorting the battery terminals together may cause sparks, burns, or a fire.
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with
j.
sharp cutting edge are less likely to bind and are easier to control.
WARNING
a.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs
b.
may create a risk of injury and fire.
c.
When battery pack is not in use, keep it away from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects that can make a connection from one terminal
to another. Shorting the battery terminals together may cause burns or a fire.
d.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
e.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries
may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or
f.
temperature above 130 °C may cause explosion. NOTE The temperature „130 °C" can be replaced by
the temperature „265 °F".
Follow all charging instructions and do not charge the battery pack or tool outside the
g.
temperature range specified in the instructions. Charging improperly or at temperatures outside
the specified range may damage the battery and increase the risk of fire.
1English1
BATTERY TOOL USE AND CARE
SERVICE
English
-4
Publicidad
