Publicidad
Idiomas disponibles
Idiomas disponibles
Never remove or tamper with safety devices . Check their proper operation regularly .
Never do anything to interfere with the intended function of a safety device or to
reduce the protection provided by a safety device .
Never operate the hedge trimmer without proper guards, plates, or other safety
protective devices in place .
Check damaged parts before further use of the hedge trimmer . A guard or other
part that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function . Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any other condition that
may affect its operation . A guard or other part that is damaged should be properly
repaired or replaced by an authorized service center unless indicated elsewhere in
this manual .
Check the blade and motor mounting bolts at frequent intervals for proper tightness .
Also, visually inspect blade for damage (e .g ., bent, cracked, and worn) . Replace the
blade only with a blade from the original equipment manufacturer (OEM) .
Replace the blade if it is bent or cracked . An unbalanced blade causes vibration that
could damage the motor drive unit or cause personal injury .
If the equipment should start to vibrate abnormally, stop the motor and check
immediately for the cause . Vibration is generally a warning of trouble .
The trimmer shall be used to cut stems less than 3/4" (19mm) thick .
Trim only in daylight or in good artificial light .
Remove or disconnect battery before servicing, cleaning, or removing material from
the hedge trimmer .
Do not wash with a hose; avoid getting water in motor and electrical connections .
When servicing use only identical replacement parts listed in this manual . Use of
parts which do not meet the original equipment specifications may lead to improper
performance and compromised safety .
Follow instructions for lubricating and changing accessories .
Keep handles dry, clean and free from oil and grease .
Do not expose a battery pack or tool to fire or excessive temperature . Exposure to
fire or temperature above 212 °F (100°C) may cause explosion .
Save these instructions . Refer to them frequently and use them to instruct others
who may use this tool . If you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product and possible injury .
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400/HT2400-FC
SAVE THESE INSTRUCTIONS!
11
Publicidad
