Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE
YOU BEGIN TO WAX, BUFF AND POLISH
YOUR CAR:
1. Wash, clean and dry your vehicle.
2. Remove
all road tar, excess
grease
spots and bug stains with a
general-purpose
cleaner.
3. Make sure the work area is dry.
ATTACHING
THE WAX APPLICATOR
BONNET
TO THE FOAM PAD
(See Figure 2)
WARNING:
When changing
accessories,
._ j/
BE SURE that the switch is in the (OFF)
Fig.
-_
position
and the cord is unplugged.
1. Place wax applicator
bonnet
on foam pad
as shown in Fig. 2.
2. ALWAYS
make sure that the elastic strip
on the bottom
of the bonnet
is securely
tucked
on the underside
of the foam pad.
APPLYING
WAXTO
BONNET
(See Figures
3 and 4)
IMPORTANT:
DO NOT APPLY WAX
DIRECTLY
ON CAR!
Fig. 3
_
APPLYING
PASTE WAX TO BONNET
(See Figure
3)
1. Spread
a heaping teaspoon of wax
evenly over entire surface of applicator
bonnet
using a putty knife or any other
____j/°
flat object (See Fig. 3).
APPLYING LIQUID WAXTO BONNET
(See Figure 4)
1. Apply three swirls of wax over applicator
bonnet (See Fig. 4).
2. This should be enough to cover 1/4 of
car surface.
3. For the second and third applications,
only use about one half as much as on
first application. The bonnet will not
absorb as much wax on these
applications.
Fig. 4
7
Publicidad
