Publicidad
Idiomas disponibles
Idiomas disponibles
2. USB/microSD
playback
TM
a. Insert a microSD
card or USB memory stick into the corresponding slot.
TM
b. Press the Mode button to select the USB or microSD™ mode
c. When playing, you can press the play/pause/TWS button to pause the playback.
d. You can press the previous and next buttons to go to the previous and next track. Rotate the volume knob
to adjust the volume.
Note: Press the EQ button to switch between the different sound effects. EQ only works in the Bluetooth
and microSD™ modes.
3. FM radio mode
a. Press the MODE button briefly to toggle through the available audio sources and select the FM mode.
b. Press once the PLAY/PAUSE/TWS button and the speaker starts scanning all the stations available. This
process may take several minutes and cannot be interrupted.
c. Once the search is complete, the unit will save active stations automatically.
d. Use the
and
to select the desired radio station. It can also be set manually using the numbered keypad
in the remote control
VI. Advanced operation
1. Pairing the speaker with wireless devices
Note: Before installing this product, please make sure your device is compatible with Bluetooth
1. Enable the Bluetooth
feature on the selected source and set it to discover the wireless speaker.
®
2. Place your wireless device and the speaker not more than three feet away from each other.
3. Next, press the Mode button and select the Bluetooth
control. The LED screen will display Blue to indicate that the speaker has entered into the pairing mode.
4. Once the speaker appears listed (KLS-601) under the newly found Bluetooth
device, it will ask if you want to pair with it. Accept by pressing Yes or OK.
5. The LED indicator blinks when searching for a Bluetooth
6. You can now start streaming audio through the speaker wirelessly from your favorite Bluetooth
7. The speaker will pair again automatically to the memorized device when the Blue mode is selected on
the unit after being turned off and on again.
2. TWS pairing
Note: Both speakers must be the same model in order to enable TWS.
1. Press the Mode button and select Bluetooth
2. Press and hold the play/pause/TWS button on the unit until you hear a beep. Then it is ready for pairing.
3. The main speaker (left channel) automatically searches and pairs with the other speaker (right channel).
After both units are paired, you hear a beep.
4. Connect the smartphone or Bluetooth
player to the speaker through Bluetooth
®
connected to the speakers you can play music with the TWS stereo speaker system.
5. TWS operates in TWS mode, changes made to the main speaker simultaneously affect the other
speaker. For example, volume adjustment, previous or next song selection, play and pause.
6. If both loudspeakers are not paired, switch off both units and repeat steps 1 through 4.
mode on the main unit or with the remote
®
devices of your wireless
®
device and turns solid when the devices are paired.
®
- enabled devices.
®
.
®
. Once the device is
®
VII. Troubleshooting
1. The display fails to turn on: Verify if the speaker is properly connected. Check the connection and plug in
the AC adapter.
2. There is no sound: Verify the volume level and adjust it to a comfortable listening level. Also, check the
mode selected and choose the playback mode according to the external source being used.
3. Sound is distorted: Decrease the master volume. You can also try lowering the volume of the source
, USB,
®
device. Adjust the EQ settings.
4. There is too much bass: Adjust the EQ control in the speaker or the source device.
5. High-pitched whistling noise when using the microphone: Point the microphone away from the speaker.
6. Microphone is not heard over the music volume: Turn down the music volume coming from the source device.
Technical specifications
Device
Type
Peak Maximum Power Output (PMPO)
Power output (Rated RMS)
Maximum AC input (current/voltage)
Maximum DC input (current/voltage)
Command console details
v5.0.
®
Speaker
Driver unit
Reference RMS power
Frequency
Impedance
Sensitivity
Signal to noise ratio
Total Harmonic Distortion (THD)
Microphone
Connectivity
Directivity
Frequency
Impedance
Sensitivity
Connectivity
Connection type
TWS function
Memory card slot
USB slot
Wireless RF frequency
Wireless range
Audio input
Additional inputs
MPN
KLS-601
Portable Party Speaker
2000W
160W
110-240V / 0.8A
9V 3A
DC12V input, LED light, power, volume, treble, microSD™/USB,
aux, LED display, mic priority, rec, previous, play/pause/TWS,
next, mode, charging indicator, microphone input, bass,
microphone volume, echo, AC 110-240V charging
Two 8in + 1.5in
120W + 40W
Subwoofer: 20Hz-100Hz
Speakers: 120Hz-20kHz
8in: 4
1in: 8
102dB
65dB
1kHz, 0dB (±10%)
Wireless (included) and wired compatible
Single
208.8MHz
600 ±15%
-77dB
Compatible with Bluetooth
Yes, compatible
MicroSD™ card (32GB max.)
Yes
2.4GHz
Up to 33ft
1
AUX 3.5mm stereo
One ¼in mic input
v5.0
®
Publicidad
