Craftsman 917.28603 Manual Del Operador página 31

TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM
Headlight(s) not
working
(if so equipped)
Battery will not
charge
Loss of drive
Engine "backfires" 1
when turning
engine "OFF"
Engine dies when 1
tractor is shifted
into reverse
CAUSE
1 Light switch is "OFF".
2 Bulb(s) or lamp(s) burned out.
3 Faulty light switch.
4 Loose or damaged wiring.
5 Blown fuse.
1 Bad battery cell(s).
2 Poor cable connections.
3 Faulty regulator (if so equipped).
4 Faulty alternator.
1 Freewheel control in "disengaged"
position.
2 Motion drive belt worn, damaged,
or broken.
3 Air trapped in transmission
during shipment or servicing.
Engine throttle control not sel
between half and full speed (fast)
position before stopping engine.
Reverse operation system (ROS)
is not "ON" while mower or other
attachment is engaged.
CORRECTION
1 Turn light switch"ON".
2 Replace bulb(s) or lamp(s).
3 Check/replace light switch.
4 Check wiring and connections.
5 Replace fuse.
1 Replace battery.
2 Check/clean all connections.
3 Replace regulator.
4 Replace alternator.
1 Place freewheel control in
"engaged" position.
2 Replace motion drive belt.
3 Purge transmission.
Move throttle control between
half and full speed (fast) position
before stopping engine.
Turn ignition key to ROS "ON"
position. See Operation section.
NEED MORE HELP?
Youql, _:ind the answer al_i more on managemyhosleocom _ for free!
o Hnd this and a[[ your other product manuals online.
o Get answers from our team of home experts.
o Get a personalized maintenance plan for your home.
o Find information and tools to help with home projects.
31