Publicidad
Idiomas disponibles
Idiomas disponibles
ET8924.book Page 15 Friday, June 22, 2007 11:18 AM
• Once validated, the program will return to the OFF position.
6 Compensation technique
Due to the characteristics of this appliance, temperature is measured at
the bottom of the appliance and adjusts perfectly to the temperature
selected by the user. However, this value can be adjusted manually
using "Heat Compensation".
1 Press the ON/OFF/PROG key to turn off the thermostat.
2 Press the M/OK key (long press) to access the menu showing 0.0 on the
screen.
3 Press the +/- buttons to adjust the temperature by 0.1ºC.
4 Press the M/OK button (short press) to return to the OFF position.
5 Switch the emitter on again.
Example:
We measure 22ºC with a thermostat in a room when the comfort
temperature selected on the thermostat is 20ºC.
• The compensation value is 22 - 20 = +2ºC .
• The user should enter +2ºC in the compensation menu.
7 Blocking the keypad
The user can ensure that nobody modifies the set program by blocking
the control keypad. This function is very useful in public buildings or to
limit access by children. To block the keypad, press the "+" and "-"
buttons simultaneously for at least 5 seconds. Do the same to unblock
the keypad.
8 Use of the humidifier (valid for all the models)
• If you want to use the humidifier – an air-freshening system that keeps a
steady humidity rate during the operation of the emitter – open the tank
and fill it with water (Fig. A). If you also want to use it to freshen or
perfume the air, add a few drops of your favourite essence (flower,
eucalypt, etc.) to the water. Close the tank.
Compensation technique
en
15
Publicidad
