Antenna Setting - NPC DTR 116C Manual De Usuario

Auto Scan
Auto Scan will erase the database
first, and scans default frequency
and bandwidth by Country Setting.
Follow the steps (1) ~ (6) at section
"How to receive the programs?"
1. Press <RED> button to be confir-
med to clear the database.
2. Press <OK> button to confirm the
database will be cleared and start
Auto Scan.
It costs time to do Auto Scan, user can press <exit> to exit at anytime.
Manual Scan
Manual Scan adds the scanning re-
sults into database, it doesn't erase
the database. But User has to know
the Frequency and Bandwidth for
scanning. If user scans the same Fre-
quency and Bandwidth more then
once, the programs will be duplica-
ted. Follow the steps (1) ~ (6) at sec-
tion "How to receive the programs?"
1. Press <GREEN> button to enter Manual Scan Page.
2. Press <Up/Down> button to select Frequency option.
3. Press <0~9> button to input the Frequency value.
4. Press <Up/Down> button to se-
lect Bandwidth option.
5. Press <Left/Right> button to set
Bandwidth value.
6. Press <OK/exit> button to start
scan or exit.
4. Decoder Operation
Main Menu
1. Press <menu> button to enter
Main Menu.
2. Press <info> button to display the
version information of STB.
SETUP
Set the system settings of STB.

Antenna Setting

Set the antenna power on or off at
Installation page.
1. Press <Up/Down> button to se-
lect Antenna Setting option.
2. Press <Left/Right> button to set
"ON" or "OFF" for turning on or off
the antenna power.
4