Browse
Browse digest of programs on screen. It can display 9 programs at once. The se-
lected program is playing, others will display its snapshot.
1.
Press <YELLOW> button to dis-
play digest.
2.
Press <Up/Down/Left/Right>
button to browse program.
3.
Press <OK> button to switch pro-
gram and watch.
4.
Press <exit> button to return the
last watching program before press
yellow button.
Message
There are some messages to inform user the current condition.
No Signal
STB can't get signal, for example,
cable is disconnected.
No Service
Program doesn't have any content
to play.
Service Scrambled
Program is scrambled for payment,
contact the content provider to
know how to descramble it.
Antenna Overload
The power of antenna is overload
HDTV not support
This STB doesn't support HDTV. If the program content is HDTV, STB will display
this message
Locked
Program is locked by setting lock and turning on password setting User must
input correct password to watch program.
6. Troubleshooting
Problem
Standby light not lit
12V DC lead unplugged
Aerial is disconnected Ae-
rial is damaged/misalig-
No signal found
ned
Out of digital signal area Check with dealer
The Scart interface not
connect hard
No picture or sound
Tuned to digital teletex
channel
Mosaic blocks in picture
Aerial may not be compa-
or picture freezes
tible
Scrambled channel mes-
Channel is scrambled
sage
Forgotten channel lock
code
Receiver off
Handset not aimed co-
rrectly
Infrared Receiver Module
No response to remote
obstructed
control
Remote control batteries
are inserted incorrectly
Handset batteries ex-
hausted
After moving the receiver
The aerial feed may come
to
another
room,find
through a distribution
can't receive the digital
system which may re-
reception
duce the digital signal
now received by the re-
ceiver
14
Possible cause
What to do
Check the lead
Check aerial lead check
aerial
Reinsert the Scart STB
to the TV set
Retune to another chan-
nel
Check aerial
Select
an
channel
Re-install channels to
cancel channel lock
Plug in and turn on recei-
ver
Aim handset at front
panel
Check for obstructions
Check batteries direction
Try a direct feed from the
antenna
Try a direct feed from the
antenna
alternative