BELLOTA NIV30360R Manual De Usuario página 35

Usage and LED
To turn off, make sure the lock switch located on the front of the laser is
in the pendulum lock position. Once locked, press the "V" button on the top
until the level stops projecting.
Self-leveling mode
Place the laser level in position making sure the pendulum lock switch is in
the unlock position. If the tool is outside the self-levelling range (4º±1) the
laser level will beep until the tool is level, at which point the laser level will
stop beeping.
Manual mode
This function is activated by placing the pendulum lock switch in the locked
position, in this mode you can use the laser level to project straight or level
lines on any surface. When deactivating the self-leveling function, the laser
will blink every 5 seconds to warn that it is working in manual mode and the
leveling may not be exact.
General instructions
To turn on yyour laser level, press and hold
the "V" in the upper area of the level. By
pressing the "V" several times the vertical
planes will be switched on and off. By
touching the "H" the horizontal plane will be
switched on/off. All planes can work either
individually or simultaneously.
35