Publicidad
Idiomas disponibles
Idiomas disponibles
Battery use and charging
When the laser tool is on, the battery charge/capacity LED indicator will be
off. When the battery has 30% power remaining, the LED indicator will flash
red and the laser tool will turn off when the battery is depleted. The LED will
illuminate solid red when the laser tool is charging. After fully charged, the
LED will turn solid green.
Do not dispose of batteries in household waste. According to the
European Directive 2006/66/EC the batteries must be disposed of in an
environmentally friendly way.
Remote control
This laser tool is equipped with a remote control, which can be used to
change planes remotely.
The remote control function can only be used after the laser tool has been
switched on. The remote control can only switch functions, but cannot
turn the laser on/off. The effective distance of the remote control is 10
metres.
LED Power
Once the leveler is ON and in self-leveling mode, press and hold the "v"
button for 2 seconds. This will cause the laser to blink twice and change
its intensity. If the laser is working at maximum projection power, the light
will change to a dim light when the battery is low.
If you want to use the laser with a receiver, the light intensity must be
lowered so that the receiver can receive the light properly.
36
Publicidad
