Publicidad
Idiomas disponibles
Idiomas disponibles
Figure4
Mount Assembly on Tractor
Install t he mountingassemblyon the tractoras follows:
1.
Placethe hookedendsof the mountingassemblyoverthe
shoulderbolts,as in Fig. 5, on the tractorand line up the hitch
supportbracketcenter holewith the hole on the tractor'shitch.
f
...........
,,
/
j
Figure5
.
Installtheclevis pin (711-0309A) f rom hardwarepack 689-00087
intothe tractor'shitchand securewith a hairpinclip (714-0117)
inserted intothe top hole,whichisthe hole locatedclosestto the
headof the clevispin. See Fig. 6.
NOTE: Feedthe clevispin downthroughthehitch supportand
secureit, usingthe holeclosestto the head,underneathwith the
hairpinclip. However, y ou mayfind iteasierto feedthe clevispin
up throughthe hitchplatehole and securewith the hairpinclip on
the topside.
NOTE: If you decidedto leavethe hitch supportonlyfingertight
duringthe assemblyprocess,tightenall of the hardwaresecurely
at this time.
,
/
//
/
/
/
J
_%'_lign holeonbracket _
withholeontractor
.,J
Figure6
Installthe baggerhangerassemblyontothe mountingassembly
on the tractorby hookingitoverthe hitch plateinthe center,lining
up the centermountinghole as seenin Fig. 7.
.
Figure7
Securethe hangerassemblyto the mountingassemblyusinga
5/16" boltand flangenut provided.See Fig. 8.
Figure8
9
Publicidad
