Intellinet Network Solutions IPS-5G01-140W Instrucciones página 3

Rear Panel
Placement
Power
The device is compatible with DC 54V, 2.8A. Plug the provided
power adapter into the designated DC interface on the switch.
Chassis Ground Column
Located on the side of the power supply connector, a grounding
terminal connector is used to provide proper grounding
for your Intellinet Network Solutions switch. If you use the
chassis grounding screw, it should be wired to an object that
provides earth ground. In rackmount installations, grounding
is typically provided by the metal frame of the mounting rack.
Desktop Installation
Prior to use, it is recommended that the
switch be placed/positioned:
• on a level surface that can support the weight of
the switch (and possibly other objects) with at least
25 mm (approx. 1") of clearance for ventilation;
• away from sources of electrical noise (radios,
transmitters, broadband amplifiers);
• and within 100 m (approx. 328') of network
devices it's to be connected to.
Wall Mounting
Install two screws into the wall at the distance of
the spaces on the back of the switch. Place the
switch over them and adjust until secure.
Instructions
3
English