Publicidad
10 | English
Power tool use and care
Do not force the power tool. Use the correct power
u
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was de-
signed.
Do not use the power tool if the switch does not turn it
u
on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or re-
u
move the battery pack, if detachable, from the power
tool before making any adjustments, changing ac-
cessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and
u
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for mis-
u
alignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly main-
u
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
u
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and
u
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Service
Have your power tool serviced by a qualified repair
u
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Mixer safety instructions
Hold the tool with both hands at the intended handles.
u
Loss of control can cause personal injury.
Ensure sufficient ventilation when mixing flammable
u
materials to avoid a hazardous atmosphere. Develop-
ing vapour may be inhaled or be ignited by the sparks the
power tool produces.
Do not mix food.Power tools and their accessories are
u
not designed for processing food.
Keep the cord away from the working area. The cord
u
may be entangled by the mixer basket.
Ensure that the mixing container is placed in a firm
u
and secure position. A container that is not properly se-
cured may move unexpectedly.
1 609 92A 8ZW | (16.11.2023)
Ensure that no liquid splashes against the housing of
u
the power tool.Liquid that has penetrated the power tool
can cause damage and lead to electric shock.
Follow the instructions and warnings for the material
u
to be mixed.Material to be mixed may be harmful.
If the power tool falls into the material to be mixed,
u
unplug the tool immediately and have the power tool
checked by a qualified repair person.Reaching into the
bucket with the tool still plugged in can lead to electric
shock.
Do not reach into the mixing container with your
u
hands or insert any other objects into it while mix-
ing.Contact with the mixer basket may lead to serious
personal injury.
Start up and run down the tool in the mixing container
u
only. The mixer basket may bend or spin in an uncon-
trolled manner.
Do not use on explosive materials (e.g highly flam-
u
mable solvents). Power tools produce sparks which can
ignite fumes.
Follow the instructions and warnings in the safety
u
data sheets (SDS) of the mixing material. The mixing
material may be harmful.
Do not use the power tool when it is connected to a
u
stand. Bench-mounted operation of the power tool is not
permitted.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is suitable for mixing construction materials
in powder form, such as mortar, plaster, adhesives, and
paints and varnishes which do not contain solvents, as well
as similar substances.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
Bosch Power Tools
Publicidad
