Publicidad
Package contents
The TruVision NVR 11 (model TVN 11) is
shipped with the following items:
•
IR (infrared) remote control (US only)
•
Two AAA batteries for the remote control
(US only)
•
AC power cord
•
12 VDC or 48 VDC PSU (depending on the
model)
•
USB mouse
•
NVR
•
Rack mounts (8 and 16-channel models
only)
•
TruVision NVR 11 Quick Start Guide
You can download the software and the
following manuals from our web site:
•
TruVision NVR 11 User Manual
•
TruVision Recorder Operator Guide
Installation environment
Refer to the user manual for detailed
information, but observe these important
requirements:
•
Place the unit in a secure location.
•
Ensure that the unit is in a well-ventilated
area.
•
Do not expose the unit to rain or moisture.
Quick install
Recommended steps for setting up the
recorder:
1. Connect all the devices required to the
back panel of the recorder. See Figure 1
on page 1.
PoE recorder models:
Connect the IP cameras to the internal PoE
switches. Connect the recorder to the
network.
Non-PoE recorder models:
Connect the recorder to the network.
2. Connect monitor A to the VGA or HDMI
output.
4
All manuals and user guides at all-guides.com
3. Connect the mouse to the USB port in the
front panel.
4. Connect the power supply to the unit and
turn on the power.
5. Set up the unit with the required settings
using the setup Wizard.
First time use
PoE recorders configure all cameras
simultaneously. When using a non-PoE
recorder, you must search for all cameras.
The configuration can then be customized as
required.
The recorder has an express installation
wizard that lets you easily configure basic
recorder settings when first used.
By default, the setup wizard will start once the
recorder has loaded. The wizard walks you
through some of the more important settings
of your recorder. Select the preferred
language for the system and then set the
administrator password. There is no default
password provided.
The wizard will then guide you through the
menus to set the time and date, network
configuration, HDD management, and
recording configuration.
When all the required changes have been
entered, click
Finish
to exit the wizard. The
recorder is now ready to use. Recording starts
automatically.
Operating the recorder
There are several ways to control the unit:
•
Front panel control
•
IR remote control
•
Mouse control
•
Web browser control
•
Software (TruVision Navigator, TVRMobile)
Front panel
The buttons on the front panel control most
functions. See Figure 2 on page 2 for the
locations of the controls.
TVN 11 Quick Start Guide
Publicidad
