Publicidad
Idiomas disponibles
Idiomas disponibles
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from
those intended could result in a hazardous
situation.
h. Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
5. Battery Tool Use And Care
a. Recharge only with the charger specified by
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of fire when used with another battery pack.
b. Use power tools only with specifically des-
ignated battery packs. Use of any other bat-
tery packs may create a risk of injury and fire.
c. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small met-
al objects, that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
d. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, seek additional medi-
cal help. Liquid ejected from the battery may
cause irritation or burns.
e. Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified bat-
teries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f. Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire
or temperature above 266°F(130 °C) may
cause explosion.
g. Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at tempera-
tures outside the specified range may dam-
age the battery and increase the risk of fire.
6. Service
a. Have your power tool serviced by a qual-
ified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b. Never service damaged battery packs. Ser-
vice of battery packs should only be per-
formed by the manufacturer or authorized
service providers.
EN - 4
SAFETY WARNINGS FOR
DRILL
1.
Safety Instructions For All Operations
a.
Hold the power tool by insulated gripping
surfaces when performing an operation
where the cutting accessory or fasteners
may contact hidden wiring. Cutting acces-
sory or fasteners contacting a "live" wire
may make exposed metal parts of the pow-
er tool "live" and could give the operator an
electric shock.
2.
Safety Instructions When Using Long Drill
Bits
a.
Never operate at higher speed than the
maximum speed rating of the drill bit. At
higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting
the workpiece, resulting in personal injury.
b.
Always start drilling at low speed and with
the bit tip in contact with the workpiece.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting
the workpiece, resulting in personal injury.
c.
Apply pressure only in direct line with the
bit and do not apply excessive pressure.
Bits can bend and cause breakage or loss
of control, resulting in personal injury.
3.
Dust/Chip Extraction
Dust from materials such as lead-containing
coatings, some wood types, minerals
and metal can be harmful to one's health.
Touching or breathing in the dust can cause
allergic reactions and/ or lead to respiratory
infections of the user or bystanders. Certain
dust, such as oak or beech dust, is considered
carcinogenic, especially in connection with
wood-treatment additives (chromate, wood
preservative). Materials containing asbestos
may only be worked on by specialists.
a.
Ensure the workplace is properly ventilated
at all times.
b.
Wearing a P2 filter-class respirator is rec-
ommended while working in a dusty envi-
ronment.
c.
Observe the relevant regulations in your
country for the materials to be worked on.
d.
Avoid dust accumulation at the workplace.
Dust can easily ignite.
ADDITIONAL SAFETY
WWW.SENIXTOOLS.COM
Publicidad
