RISK OF BURNS!
Leaking battery acid can lead to chemi-
cal burns. Avoid contact of battery acid
with skin, eyes and mucous membranes.
In the event of contact with acid, rinse
the affected region immediately with
plenty of water and seek for medical
attention.
NOTE!
• All electronic operation should strictly
comply with electrical safety codes,
fire codes, and other pertinent codes
in your area.
• Please use the cable normally included
in the delivery. The power consump-
tion must not be less or greater than
the required value.
• Do not drop the device or expose it
to strong mechanical shocks or large
electromagnetic radiation.
• Do not clean the device with deter-
gent but use a slightly damp cloth
to clean the lens
• Do not expose the device to di-
rect sunlight or similar strong heat
sources. Otherwise, blooming or
smear effects may occur and at the
same time the service life of the
sensor will be impaired. The sun
can burn into the sensor and cause
irreparable sensor damage.
• The optics can be twisted out of the
socket if turned excessively. Please
turn the optics only so far in both di-
rections until you have optimized the
focus of the device. - If necessary,
clean the lens with a slightly damp
eyeglass cleaning cloth and do not
use physical pressure. The protective
surface could be damaged by this.
www.alpenoptics.de
US/GB
DE
FR
ES
NL
IT
PL
RU
5