Mac Mah KOLOR-BAR Modo De Empleo página 12

11
12
C. Use in AUTO or SOUND mode with Master/Slave function.
In Master/Slave MODE, the 1
practical when you need to make a quick installation with an immediate result. The
following fixtures must be selected in A001 or d001 To do this, the
connected together using an XLR DMX cable.
The desired Auto or Sound mode must then be selected on the 1
be duplicated on the other linked
or d001" mode.
D. Use in DMX mode
This mode allows you to control your
Each device must first be "addressed" from 1 to 512.
Press MENU to display A001 (8-channel mode) or d001 (20-channel mode), press
ENTER, then use the DOWN and UP keys to select the DMX address you require. Press
ENTER to confirm the value.
8-channel DMX protocol :
Channel
CH1 0 - 255
CH2 0 - 255
CH3
0 - 255
CH4
0 - 255
CH5 0 - 255
CH6 0 - 255
Function
CH7
selection
CP99 01 - 99
SU01 01 - 02
er
kolor-bar controls the following units. This mode is very
KOLOR-bars
Value
Master dimmer (0-100%)
Dimmer red 4 spotlights
Dimmer green 4 spotlights
Blue dimmer 4 spotlights
Dimmer white 4 spotlights
Stroboscope, from slow to fast
0: Dimmer mode
1 to 50: Colour selection (selected by ch8)
51-78: Individual colour jump
79-100: Global colour jump
101-128: Individual colour fade
Colour pulse from slow to fast
SOUND mode 1: with strobe
2 : colours
if the other
KOLOR-bar
with a DMX controller.
Function
Kolor-bars
Kolor-bar
er
KOLOR-bars
are in "A001
must be
and will
12