Publicidad
Idiomas disponibles
Idiomas disponibles
24
en
Working instructions.
Before mounting or replacing application tools or accessories, remove the
WARNING
battery. This preventive safety measure rules out the danger of injuries
through accidental starting of the power tool.
For each job, use only the FEIN application tool released and intended for the respec-
tive application.
Switching on and off.
Always hold the power tool
CAUTION
firmly. Otherwise, you could
lose control over the power tool.
The self-start lock prevents the cordless
angle grinder from automatically restarting
again after a power interruption, e.g., after
changing the battery. In this case, switch the
power tool off, remove it from the work-
piece and check the application tool. After-
wards, switch the power tool on again.
CCG18-125-10 AS (**) (figure 10).
Switching on:
Press and push the On/Off switch forward
(I).
Switching off:
Press the switch downward ().
For best performance, operate the power
tool only with FEIN CORE batteries or
with CORE batteries of AMPShare part-
ners. When using other batteries, the func-
tionality can be limited.
Fig. 10
On/Off switch
2.
1.
Publicidad
