1 - Hopper
2 - Top case
3 - Hopper
4 - On/off switch
5 - Motor
6 - Wheels
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not exceed 85%.
Place the unit in a way that ensures good air circulation. Maintain a minimum clearance of 10 cm
from any wall of the unit. Keep the unit away from any hot surfaces. Always operate the unit on a
level, stable, clean, fireproof and dry surface and out of the reach of children and persons of
impaired mental, sensory and intellectual functions. Place the unit in such a way that the mains
plug can be reached at any time. Ensure that the power supply to the unit corresponds to that
specified on the identification plate!
Installation of the unit
After unpacking the unit, complete the following steps:
• Install the net in the hopper, and then put it on the machine housing
• screw on the chute.
EN