To Fill the Water Reservoir (use tap water)
1. Set the Steam Lever to
is unplugged.
2. Lift the Water Fill Hole Cover.
3. F ill a cup with tap water and pour water into iron water reservoir. Do not fill water
reservoir beyond maximum fill level.
WARNING: To prevent the risk of burns, be careful when filling a hot iron with water. Hot
metal parts, hot water and steam can cause injuries.
1. Make sure the Steam Lever is turned to the
2. Plug the cord into a 127-Volt AC outlet.
3. Turn the large Fabric Select Dial to the fabric setting you desire. Allow the iron to heat
for 2 minutes. While the iron is heating, make sure it is sitting on its heel rest on a
stable, protected surface.
Note: While the Steam Lever is turned to the
OF STEAM
or SPRAY MIST
®
cotton, or linen. Please make sure the water reservoir is approximately 1/4 full of water.
1. Follow the instructions for "Filling the Water Reservoir."
2. Plug the cord into a 127-Volt AC outlet.
3. Turn the Fabric Select Dial to the fabric setting you desire. Allow the iron to heat for 2
minutes. While the iron is heating, make sure it is sitting on its heel rest on a stable,
protected surface.
CAUTION: When not ironing, always set the Steam Lever to
Select Dial to OFF.
Using the Iron's Special Features
Spray Mist
Feature is a powerful water spray mist that dampens the fabric to aid in
®
removing wrinkles from heavy fabrics and for setting creases.
To use the Spray Mist
Shot of Steam
Feature provides an extra burst of steam for deep penetration of
®
stubborn wrinkles. You can use this feature while Dry or Steam ironing, as long as
the Fabric Select Dial is set to wool, cotton, or linen. The water reservoir must be
approximately ¼ full of water.
To use the Shot of Steam
Shot of Steam
button each time you would like an extra burst of steam. The Shot of
®
Steam
feature may be used continuously in approximately 3-second intervals.
®
Vertical Steam (select models only) allows your iron to function as a garment steamer.
Tip: When using vertical steam on clothing, hang the clothing on a clothes hanger for
best results. Hanging curtains and drapes may also be steamed.
(Dry) and the Fabric-Select Dial to OFF. Make sure the iron
Dry Ironing
feature, as long as the Fabric Select Dial is set to wool,
®
Steam Ironing
Feature: Press the Spray Mist
®
Feature: Place the iron on top of the wrinkle and press the
®
English - 3
(Dry) setting.
(Dry) setting, you may still use the SHOT
(Dry) and the Fabric
button firmly.
®