Thulos TH-GH421 Manual De Instrucciones página 23

GAS CYLINDER CONNECTION
1. Place the gas filled cylinder on the back of the heater.
2. Put and anchor the gas regulator to the gas cylinder.
3. Turn on the gas at the regulator attached to the cylinder.
4. We recommend that you use a butane gas bottle.
5. IMPORTANT LEAK TEST: Must be performed in a well-ventilated area, free from flames
and any other heat sources. With the regulator connected to the cylinder, turn the regulator
control on. Lightly wet all connections from the gas cylinder to the appliance valve with a
solution of detergent and water or leak detector spray. The formation of a stream of bubbles
indicates a leak. If a leak is found, turn off the regulator and disconnect the regulator from the
cylinder and remove the gas cylinder outdoors or in a well-ventilated area. DO NOT USE
THE HEATER. Contact your gas supplier for help. Fix the back cover after the leak test.
HOW TO CHANGE THE GAS CYLINDER
1. Turn off or close regulator (turn regulator lever clockwise to close valve) and allow heater
to cool completely before removing and replacing cylinder. Do not attempt to replace the
cylinder while the heater is still in use.
2. Cylinders should be replaced in a flame free environment.
3. Do not smoke while changing the cylinder
4. When you need to replace your empty cylinder, turn off the gas at the regulator and
remove the empty cylinder from the heater.
5. Remove the regulator from the empty cylinder.
6. Follow the steps under "Gas cylinder connection", connect a new cylinder.
ATTENTION.
To turn off the gas heater in the cylinder, turn the regulator switch to the OFF position. If the
heater is not going to be used for a period of time, disconnect the regulator from the cylinder
and replace any guards or covers.
Do not forcefully turn the control knob, the button should be gently depressed before turning
the control knob. The control knob cannot be turned without being pushed down.
Make sure the knob is locked in the required heating position after operation.
CAUTION: Some parts of this product can become very hot and cause burns. Special
attention should be paid when children, pets and vulnerable people are present.