Recharging The Removed Battery; Recharging The Battery Without Removing It - Giropes XBAT Manual De Usuario

| USER'S MANUAL | EN

2.2 RECHARGING THE REMOVED BATTERY

The battery is removed from the pallet truck and transported to an area where it can be plugged into a 110- 240VAC 50/60Hz charger. This
will be another external element and will have a cable with the same connector that will allow charging at 8.4V.
1
2
3

2.3 RECHARGING THE BATTERY WITHOUT REMOVING IT

The pallet truck itself is transported to an area where it can be plugged into the mains via a 110-240VAC 50/60Hz charger. This will be
another external element and will have a cable with the same connector that will allow charging at 8.4V.
1
2
It is disconnected once the battery is charged, as indicated by the green LED on the charger itself.
Connect to the CABLE, then plug the charger into the mains.
The LED will be red while the battery is charging and green when the battery is fully charged.
First disconnect the cahrger from the mains and then disconnected from the cable.
It is connected with the same CABLE, then the charger is plugged into the mains.
13