MD SPORTS 57000 Instrucciones De Armado página 8

FIG. 8
12. Connect Top Tubes (#12) to the assembled tubes (#11) by sliding them together. Then,
slide the two sleeves of the Ramp Nets (#18) onto each Top Tubes (#12) as shown in FIG.8.
GD =
rT
#18__ th =
~ Ante ith #12
Hy A
! He #11
et H C [_—
FIG. 9
13. Tear off the paper from in front of Electronic Scorer (#16) and stick it to the Backboard
(#13). then using four Screws (#23) as shown in FIG.9A.
14. Attach the Rim (#14) to the Backboard (#13) using four Bolts (#22), the Metal Spacer
Plate (#15) to the back of backboard, four Washers (#24) and four Locknuts (#26)
as shown in FIG.9B.
15. Attach the Switch with Paddle assembly (#25) to the Backboard (#13) using four Bolts
(#22), eight Washers (#24) and four Locknuts (#26) as shown in FIG. 9B.
16. Connect the wire coming from the Switch with Paddle assembly (#25) to the Electronic
Scorer (#16) as shown in FIG. 9C.
ae
#23