Publicidad
Idiomas disponibles
Idiomas disponibles
English
Hardware Installation
1.
First, install the U.2 SSD or SATA HDD / SSD onto the PCI Express card.
2.
If you want to use a SATA device, you need to connect an additional SATA
cable to the SATA port of the PCIe card and a free SATA port on your
motherboard.
3.
Turn off your PC and unplug the power cord.
4.
Open the housing.
5.
Remove the slot holder from the available PCI Express slot.
6.
Insert the card straight and carefully into the free PCI Express slot, until it is
well seated.
7.
Use a screw to attach the card to the housing.
8.
Reattach the housing and connect the power cord to the AC adapter.
9.
Switch on your computer.
Driver Installation for NVMe
1.
If the latest driver for NVMe SSD are not included in your system, you need
to download and install it.
2.
After that you need to restart your system.
3.
Now you can use the PCIe card with SSD.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 12/2023
-3-
Publicidad
