Publicidad
IMPORTANT! The diagrams and figures in this instruction are illustrative and indicative only. Follow exactly the instructions and
sequence for assembling and operating with the product. Check the securing of the fixation after each operation.
Fixing a certain position in most cases is accompanied by a clicking sound.
Components - illustration A
After unpacking, make sure that all elements of illustration A are available.
1.Pillow; 2. Soft toys (2 pcs); 3. Canopy; 4. Seat body cover; 5. Remote control; 6. Adaptor with cable; 7. Seat frame; 8. Support
base tubes (2 legs).
Assembling the base – illustration B
Insert the tubes 2 and 3 at the bottom of the music mechanism (1). Insert the two support tubes into the bottom of the control
and music mechanism (they are fixed by means of a spring-button clip). Connect the two parts of element 7 (A and B) as shown in
the diagram. Then fix it in the base. The D-shaped slot of the seat frame should fit into the D-shaped element of the base.
Attention! Make sure the base is assembled correctly and is stable, this ensures your child's safety!
Upholstery installation - illustration C
Place the upholstery (element 4) over the seat frame (element 7) and fasten it to the back of the seat with Velcro strips. Make
sure it is stable and will not come off under the weight of the child.
Placing a canopy – illustration D
Fasten the canopy (item 3) at the top of the seat frame using the two side knobs.
Installing the restraint system – illustration E
Place the baby in the swing and fasten the belt on both side (you will hear a "click" sound when properly fixed in the buckle). Fasten
the belts around the child's waist in a position that is comfortable for him. Check the restraint system by pulling it slightly away
from your child. The restraint system must remain attached. You can adjust the height of the shoulder belts according to the child's
height.
Disassembly: press the button illustrated in the diagram, then lift the seat frame off the base.
Lock swing function – illustration F
To lock the swing function, lock the seat frame by moving down the button shown in the diagram. By pushing the button upwards,
you use the "swing" function again.
Power supply with adaper (Adapter in) – illustration and key G
Input AC 100-240V - 50/60Hz and output DC 5V/1A. Insert the adapter tip into the control and music panel input and the adapter
plug into the mains socket (230V). When the DC power supply is higher than 5.7V, all five gear-setting indicator lights flashes for
5 seconds and then the mainboard automatically shuts off.
Touch panel functions – illustration and key H
✓ Power button (on/off): When the button is touched, all indicator lights turn on. When touched again, the swing switches
off.
✓ Timer: Touch the button to set the time: once to activate the "cradle" function for 8 minutes, twice for 15 minutes and
three times for 30 minutes. If no operation is performed within 60 seconds after the baby cradle is switched on, the cradle
will go into standby mode.
✓ Swing speeds: The swing has 5 swing speeds. When you touch the button once, the swing turns on the first swing speed
and the first indicator light comes on When you touch the button again, the swing turns on the second swing speed and the
second indicator light comes on. When the button is touched three times, the swing switches to the third swing speed and
the third indicator light starts to illuminate and so on until the last 5 speeds are reached.
✓ Music button with 8 melodies: Touch the button to switch on the music function. Touch again to turn the music off. Hold
for 2 seconds to move to the next melody.
✓ Volume control – 5 levels: The volume starts at level 3. Touch the button again until the desired sound is produced.
✓ Motion detection: Touch the button to activate the baby motion detection mode, the swing will start swinging at 1 swing
speed for 8 minutes. If the parent sets a different swing speed and time, when the time is up, the baby swing re-enters the
automatic swing activation mode.
✓ Using Bluetooth: When you press the Bluetooth graphic image button, you can play music from another device with the
same function. In this case, the music function of the product cannot be used.
Remote control functions – illustration and key G:
Attention! To operate the functions of the swing, you must point the remote control device at the control box panel and tunes.
Cleaning
✓ The upholstery of the product can be removed for easier cleaning. Unbutton the seat belt, lift the bottom of the
upholstery. Release the rear frame of the backrest, after which you can remove the upholstery. Clean with a soft cloth soaked in
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
17
Publicidad
