Desoutter KL245B Manual Del Usuario página 19

DISASSEMBLY AND REASSEMBLY
INSTRUCTIONS
Disconnect the machine from the
compressed air supply.Remove all
accessories.
Before disassembling the machine,
decompress the air from the oil tank by
loosening and retightening the screw
(615640270).
At each disassembly of the governor,
clean the spring housing, check the
condition of the spring and re-lubricate it
carefully.
The governor has a calibrated spring
which can only be replaced by an
original spare part.
When re-assembling, always position
the cylinder exhaust on the opposite side
to the holes in the machine housing.
KL277B7Y - KL260B7Y - KL260B9Y
KL260B6CY KL245B9Y - KL245B6CY
KL377B7Y - KL360B7Y KL360B9Y
KL360B6CY - KL345B6CY - KL345B9Y
OVERSPEED AIR SHUT-OFF DEVICE
Be particularly careful with the speed governor
and the overspeed air shut-off device. Careless
maintenance or treatment may prevent them
from functioning correctly. If the machine stops
suddenly or does not reach rated speed when
connected to the air supply, the overspeed shut-
off device may have closed the inlet air.
The machine must imperatively be dismantled
and checked before resetting the overspeed
shut-off device (see drawings below).
04/2009
OK
4,5K
6K
7,7K
1
6158010770
3
6158010770
2
1
4
6159948080
Issue no: 0
Series: C
OK
4,5K
6K
7,7K
2
6153201300
4,5K
6153201280
6153201290
6K
7,7K
5
60 N.m
615 8010770
19 / 84