Aquaglide ARETE 10 Manual Del Usuario página 7

Chart 1 – Working Pressure by Chamber - Arete 10
Valve [Inflate Order]
MAIN [1]
Locate a flat, dry area with access to outlet for electrical pump. The best setup position will also make
launching easy. Never drag product as damage may occur.
1. Unfold product completely and locate Main Valve [1]. To help future storage, closely note original fold-
ing & packaging method. Remove valve cap and confirm valve is in inflate (1-way airflow) position. This item
has two main valves to allow the option of using multiple pumps to reduce inflate/ deflate time.
2. Insert air pump hose with proper valve fitting into Main Valve [1], lock into place. Use pump to inflate
Main Valve [1] to Working Pressure as shown in Chart 1.
3. Confirm that suitable anchor(s) and mooring lines are in place before launching this item (see
Anchoring).
4. To launch product, lift completely and place in water. Large items may require many extra people to
accomplish this. Never drag product as damage may occur.
5. When connecting multiple items together, always follow manufacturer's recommendations. Use only
Aquaglide Two-Step Vario-lock cinch straps and connecting rings. Make sure connection is tight and there
is NO GAP between items. Failure to connect items properly may result in injury or death. See E1 - E6.
a. Attach straps to 'Boarding Features' (example: Swimstep, Splashmat, Speedway, Breezeway or
Deck) where a connection is required. Boarding Features should not be attached to other Boarding
Features.
b. Use all available rings to make connection. Standard connections use 5 rings. Some items use 3 or
occasionally 7 rings/ straps. ARETE 10 is a Main Feature item with 5-ring connections on 2 sides.
c. Float 'Boarding Feature' into desired position. Note: a matching set of connecting rings is required
on feature item.
d. Attach center strap to center ring on feature item. Connect loosely, then work outward until all
straps are connected.
e. Dive beneath to tighten all straps securely. Dive mask and several attempts may be required.
E-1
7
Working Pressure in psi (Bar)
1.0psi (0,069bar)
E-4
E-2
E-5
E-3
E-6
www.aquaglide.com