Aquaglide ARETE 10 Manual Del Usuario página 9

OPERATION
Arete 10 is a floating jump station and climbing feature for use in water. Users may climb using routes on
either side and slide or jump into the water in multiple locations.
PVC surfaces are slipperier when wet, which can lead to loss of balance when walking or climbing. Slide
surfaces will perform better when previously wetted. Chemical treatments are available to reduce friction on
sliding surfaces, but are not generally necessary if products are kept clean.
Maintain Working Pressure: Air pressure is temperature dependent. Always confirm proper working
pressure before and during use as changing temperatures may affect the internal pressure. If product
shows signs of instability or pressure loss, discontinue use until product is returned to working pressure
and/or repairs made.
Disperse loads: Do not concentrate more than 300lb (136kg) in any one area during use.
Manage Winds/ Storms: If strong winds (25kts +) or storms are expected, discontinue use. Remove
product from water and secure or store it.
Check Connections: Regularly check to confirm that all connections are secure. Replace any connecting
straps showing any signs of wear.
Clean & Maintain: Regularly check to confirm product is clean and all handles & accessories are function-
ing properly. Each site requires its own cleaning/ maintenance schedule, but regular cleaning and periodic
maintenance is required to ensure full product life. Replace any handles or accessories showing signs of
wear.
Check Moorings: Regularly check mooring lines and anchors, especially after extreme conditions. Re-
place any items showing signs of wear or permanent stretching.
9
www.aquaglide.com