Publicidad
Idiomas disponibles
Idiomas disponibles
Massage heads up-down and width adjustment
|
Adjust the vertical position of the massage heads.
e Use the up or down adjustment button to adjust the up or down direction of the massage heads.
To raise the massage heads, press the "up"(a) button. To lower them, press the "down"(w) button.
e The massage heads will move while holding your finger on the button, Is being pressed.
e When the massage heads have reached the desired position, release the button and the heads will stay in
that position.
Select the width of the massage heads.
Use the narrow or wide buttons to select the width between the massage heads (available only in the tapping
massage and rolling, tapping rolling).
NOTE: If the massage heads are forcibly locked, they will stop for safety and the controller panel will warn
you with blinking lamps.
Raise your back slightly and press "start/reset".
Massage stroke adjustment
For rolling, kneading rolling, and tapping rolling
oi
e Switch between regional and full
IONE
Regional : Approx. 43/4in. (120 mm)
7
ae
F
Full
: Approx. 23 1/16 in. (600 mm)
w
e When regional is selected, adjust the height of the massage heads with the
up/down adjustment buttons.
15
Publicidad
