Publicidad
POWER SUPPLY
Using on AC house current
Before
connecting
the AC cord (LH model
only) *
The LH model has an AC VOLTAGE
selector.
Make sure that the AC
VOLTAGE
selector
is set to the position matching your local voltage.
If it is not correctly
set, change it with a screwdriver
or a similar tool.
Either 110-120V
or 220-240V
can be selected.
Connect
the supplied
AC cord.
H
Q)
to the AC inlet of the unit
@to
a wall outlet
CAUTION
The AC inlet of this set may be connected
only with the attached
AC
"
power cord or one recommended
by AIWA CO., LTD. Use with others
may result in the risk of fire or damage of AC inlet.
Using on batteries
Insert eight R14 (size C) batteries
with the 0 and
O
marks
correctly
aligned.
+
Replace batteries
when the OPE/BATT
indicator
becomes
dim, the
tape speed slows down, volume
decreases,
or sound
is distorted
during operation.
Make sure that the FUNCTION switch is set to POWER O STANDBY/
TAPE before inserting
batteries.
Note on the batteries
Q
Make sure that the ~ and @ marks are correctly
aligned.
o Do not mix different types of batteries or old batteries with new ones.
Never recharge the batteries,
apply heat to them or take them apart.
. When not using the batteries,
remove
them to prevent
needless
battery wear.
If liquid leaks from the batteries,
wipe thoroughly
to remove.
REMOTE CONTROL
(CSD-ES770/ES5700111y)
The remote control can be used only for CD operation.
Buttons on the remote control and the main unit with identical
indica-
tions have the same functions.
Inserting
batteries
Insert two R6 (size AA) batteries
before use.
Replacing
batteries
The maximum
operation
distance
of the remote control
should
be
approximately
5 meters
(16 feet).
When this distance
decreases,
replace the batteries
with new ones.
Hints for correct
operation
.
When the unit is not to be used for a long period, remove the batteries
to prevent electrolyte
leakage.
. Do not expose the light receiving section to direct sunlight or to strong
artificial
lighting.
If objects
intervene
between
the light receiving
section
and the
remote control, the latter may not work correctly.
o The sensor's light reception range is limited. Point the remote control
toward the recorder when using it.
6
Publicidad
