Cameo LEYA 2000 RGB Manual De Usuario página 13

Press the button to activate the ScanFail Safety system and again to deactivate it. The associat-
ed indicator LED lights up when the ScanFail Safety system is activated. If the ScanFail Safety
system is deactivated, the associated LED does not light up (LED switched off).
PLEASE NOTE
After a restart, the last selected state is activated.
9 RGB BRIGHTNESS CONTROL
Use the brightness control to set the brightness of the R, G and B lasers as required (far left =
laser dimmed to zero, far right = laser at maximum brightness).
10 RGB DISPLAY LEDS
The LEDs indicate which of the three built-in lasers R, G and B are currently active.
11 ADJUSTING THE LASER PROJECTION
Horizontal rotation of projection, continuously variable from 0° to 180°.
Vertical rotation of projection, continuously variable from 0° to 180°.
Shift projection on the horizontal plane.
Shift projection on the vertical plane.
13