Vaillant sensoHOME VRT 380/2 Manual De Uso E Instalación página 19

4 -- Start-up
4.1 Prerequisites for starting up
– The system control and, if required, the
outdoor temperature sensor have been
electrically installed and wired.
– Start-up of all system components (ex-
cept for the system control) is complete.
4.2 Running the installation
assistants
The installation assistant is at the Lan-
guage: query.
The system control's installation assistant
takes you through a list of functions. For
each function, you should choose the set
value that is best suited to the heating
installation being installed.
4.2.1 Completing the installation
assistant
Once you have gone through the installa-
tion assistant, Select the next step. ap-
pears on the display
Installation configuration: The installa-
tion assistant switches to the system con-
figuration for the installer level, in which
you can further optimise the heating in-
stallation.
Installation start: The installation assist-
ant switches to the basic display and the
heating installation works with the values
you have set.
4.3 Changing the settings later
All settings that you have made via the in-
stallation assistant can be changed again
at a later date via the end user or installer
level.
0020323630_00 Operating and installation instructions
5 Fault and maintenance
messages
5.1 Fault message
with the text of the fault message
appears in the display.
You can find fault messages under: MENU
→ SETTINGS → Installer level → Fault
history
Troubleshooting (→ Appendix)
5.2 Maintenance message
with the text of the maintenance mes-
sage appears in the display.
Maintenance message (→ Appendix)
6 Information about the
product
6.1 Observing and storing other
applicable documents
▶
Observe all of the instructions that are
intended for you and are enclosed with
the components of the installation.
▶
As the end user, keep these instructions
and all other applicable documents safe
for future use.
6.2 Validity of the instructions
These instructions apply only to:
– 0020260951
6.3 Data plate
The data plate is located on the rear of the
product.
Information on the
data plate
Serial number
sensoHOME
V
Meaning
for identification;
7th to 16th digits
= product article
number
Product designation
Rated voltage
19