Vaillant sensoHOME VRT 380/2 Manual De Uso E Instalación página 9

2.10 Operating and display functions
Note
The functions described in this section are not available for all system configura-
tions.
To call up the menu, press
2.10.1 CONTROL menu item
MENU → CONTROL
→ Zone
→ Mode:
→ Name of zone
→ Absence
→ DHW
→ Mode:
0020323630_00 Operating and installation instructions
twice.
→ Manual
Uninterrupted retention of the desired temperature
→ Time-contr.
Weekly planner: Up to 12 time periods and desired temperatures can
be set per day
The competent person sets how the heating installation behaves out-
side of the time period in the Set-back mode: function.
In Set-back mode: means:
– Eco: The heating is switched off outside of the time periods. Frost
protection is activated.
– Normal: The set-back temperature applies outside of the time peri-
ods.
Desired temperature: °C: Applies within the time periods
Factory setting: Set-back temperature: °C 15 °C
→ Off
Heating is switched off, domestic hot water continues to be available,
frost protection is activated
Changing the name Zone 1, which was set at the factory
→ All: Applies only to any zones within the specified time period
→ Zone: Applies for the selected zone in the specified time period
During this time, heating mode runs at the defined set-back temperat-
ure. Domestic hot water mode and circulation are switched off.
Factory setting: Set-back temperature: °C 15 °C
→ Manual
Uninterrupted retention of the domestic hot water temperature
→ Time-contr.
→ Desired temperature: °C
→ Weekly planner
→ Set-back temperature: °C
→ DHW temperature: °C
→ Domestic hot water weekly planner
→ DHW temperature: °C
→ Circulation weekly planner
9