MS Schippers MS AviCleaner Manual De Instrucciones página 42

Choose cleaning the feeding lines or the drinking lines
There are 2 different cleaning choices on the MS Avicleaner: the feeding lines or the drinking lines.
The following explains how to make the different choices.
It is important that it is set properly based on what you are going to clean, because it uses a different circuit
to clean inside the machine.
On the front of the machine there are two 3 way valves shown below. There are also symbols on the MS
Avicleaner to clarify the choice. The ''water drop'' on the left side is for the drinking lines and the ''feed tray''
on the right side is for the feeding lines.
Move the levers to the desired position, making sure both levers are in the same position.
Example: in the image below, the two 3-way valves are in the position to clean the feed lines.
42