Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT USE
Magnetic emergency stop system
The product is equipped with a "magnetic emergency stop system". This safety strap must be attached
to the console for it to work. It is designed to attach to clothing so that if you walk off or fall off the
treadmill, it will stop automatically, helping to prevent injury.
Before starting a workout, make sure the safety strap is properly attached to the console and that the
clip is securely attached to your clothing.
WARNING! If the device is switched on, but the safety strap is not connected, "- - -" appears on the
display and the device cannot be started.
Commissioning
The equipment has a computerised display that provides you with controls for the operation of the unit,
as well as information about the workout, duration, speed, distance travelled, etc. To use the equipment:
1.
Plug the equipment into a mains socket.
2.
Turn the power switch, located on the front of the unit, to the "ON" ("I") position.
3.
Fix the safety strap to the console.
Your tape is ready!
BEWARE! Always stand on the side rails before starting the machine. Never stand on the belt and then
start the machine.
power switch
Display
The display shows current information, such as current speed,
elapsed or remaining time, calories remaining, heart rate, etc.
Note: When displaying the pulse, you must have both hands on
the metal sensors on each handle.
Safety key function
Unplug the safety key and window display "E7" the treadmill stop
running, and beep alarm sound appears, the electronic watch
display 2 seconds when put on the safety key, all data zero.
19
EN - MC-100
Start / stop:
Start key, in the treadmill stop state, press start
key, speed display "1 km ", treadmill start. Stop
key, in the treadmill running state, press stop key,
all data clear, treadmill stop back to manual mode,
treadmill stop.
Press the "start" button, treadmill start to running,
speed window show 1km. Press the "stop" button,
all data clearing and will record from zero, treadmill
will stop slowly and return to manual mode.
Program
When standby, press this key to cycle from
manual mode to automatic mode P1—P12;
manual mode is the default running mode of the
system.
Reduce speed
To toggle between time,
distance, and calorie
options
To turn off the equipment
To turn on the equipment
To select a preset program
3 manual programs , 1 2
automatic programs
To increase the speed
Publicidad
