Publicidad
Idiomas disponibles
Idiomas disponibles
90
WORK AREA SAFETY
•
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
•
Do not operate power tools in explosive which may ignite the dust or fumes atmospheres, such as
in the presence of flammable liquids, gases or dust.
•
Power tools create sparks which may ignite the dust or fumes.
•
Keep children and bystanders away while operating control. Distractions can cause you to lose control.
ELECTRICAL SAFETY
•
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs, with earthed (grounded), power tools. Unmodified plugs and matching outlest will reduce
risk of electric shock.
•
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
•
Do not expose power tools to rain or wet conditions, Water entering a power tool will increase the
risk of electric shock.
•
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
carrying, pulling or unplugging the power tool.
•
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
•
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
•
If operating a power tool in a damp location is, unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
PERSONAL SAFETY
•
Stay alert, watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in serious personal injury.
•
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
•
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power
source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger
on the switch or energising power tools that have the switch, on invites accidents
•
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
•
Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
•
If devices are provided for the connection of dust extraction and collection facilities, ensure these
Publicidad
