Elektra Beckum MIG/MAG 301 E Manual De Uso página 21

With the purchase of this Elektra Beckum welding power source you have obtained a high-quality, universal MIG/MAG
welding machine.
To avoid operating errors we suggest you carefully study the instructions given in this booklet.
Contents
1 Scope of Application
1.1 System Component Combinations
1.1.1 E-Series MIG/MAG Welding Machines
1.2 Technical Specifications
1.3 Cables
2 Description
2.1 E-Series Panel Controls
2.2 Recommended Settings
2.2.1 Table of Recommended Settings for MIG/MAG 301 E
2.2.2 Table of Recommended Settings for MIG/MAG 351 E
2.3 Interconnecting Torch Lead Extensions
2.4 Caster Set Option
2.5 Information
3 Commissioning
3.1 Transportation
1 Scope of Application
The welding machines are suitable for welding FE-metals, high-alloy steels and aluminium. All units are steplessly
controlled with preprogrammed constant current characteristics. Constant current characteristics are programmed for
all electrode wire diameters and shielding gases, suitable for use with the machines.
The welding machines are equipped with a detachable wire feed unit (SDV), giving the flexibility to work at different
locations. By using interconnecting torch lead extensions (optional accessory) the working range can be extended.
Caution! Do not operate this MIG/MAG welding machine near electronic data processing equipment.
Product Liability/Warranty
These welding machines shall only be used as specified. Any other use requires the written consent of Metabo GmbH,
Business Unit Elektra Beckum, P.O.Box 1352, D-49703 Meppen, Germany.
This product carries 2 years (5 years on main transformer and choke) manufacturer warranty under the prevailing legal
provisions, which may vary from country to country. Retain proof of purchase! You are only entitled to claim warranty
against proof of purchase. Please see back cover for manufacturer representative's address nearest you.
The warranty period begins with the date of the original purchase by the end user. Proof of purchase should be retained
and must be presented in the event of a warranty claim. This warranty excludes and does not cover defects, malfunction
and failure caused by natural wear, overload, unreasonable use or failure to provide reasonable and necessary
maintenance.
In case of a defect notify your dealer or Elektra Beckum distributor, who will decide how to handle your claim. Warranty
claims can only be taken care of by your Elektra Beckum dealer or authorized service centre.
Caution! Do not disassemble the pressure regulator. It may explode if reassembled incorrectly.
Danger of personal injury!
3.2 Electrode Wire Spool Installation
3.3 Power Supply
3.4 Earth Cable
3.5 Shielding Gas Supply
3.5.1 Shielding Gas Supply Setting
4 Settings
4.1 Welding Voltage for Aluminium
4.2 High-Alloy Steels
5 Safety Precautions/Accident Prevention
6 Service and Maintenance
7 Trouble Shooting
8 Spares and Accessories
9 Wiring Diagram
ENG