Publicidad
Idiomas disponibles
Idiomas disponibles
•
Do not touch blade handle and blades until they cool down.
•
Unplug the product when not using the product.
7. OPERATING INSTRUCTIONS
•
Make sure the tyre you want to re-groove is REGROOVABLE.
•
Choose the suitable blade and put it on the blade holder.
•
Plug the product into power socket.
•
Turn on the machine (display will show voltage value).
•
Use voltage adjust knob to select blade temperature (it is recommended to begin with a low
voltage and raise it if necessary).
•
Fasten the handle and put the blade on the surface of the tire to begin grooving it.
•
After working for a few minutes, let the blade cool for a few seconds.
•
When the work is finished or you wish to change the blade, wait for 10 minutes, until the blade
has cool down.
•
When the work is finished, set the voltage adjust knob to the minimum and turn off the machine.
8. TROUBLE SHOOTING
Display is working but the blade does not get heat.
It is difficult to slide the blade
Rubber smokes
FR
GUIDE D'UTILISATION
1. DESCRIPTION DU DISPOSITIF
Grâce à cette machine, on peut remettre en
état le protecteur prolongeant la durée de vie
des pneus.
3. COMPOSANTS
PROBLEM
Change the fuse.
Turn up the temperature
Turn down the temperature
2. CARACTÉRISTIQUES TECHNIQUES
Tension
Tension à la sortie
Puissance maximale
Dimensions du manche 20 x 3,8 cm
· 5 ·
SOLUTION
220 V, 50/60 Hz
4 V
350 W
Publicidad
