Publicidad
Idiomas disponibles
Idiomas disponibles
24
Installation Guide
serious personal injury or death.
Q Installation Hardware
0 | Mounting collar
Hex. nut (5 mma)
Removable face plate case
Trim plate
(J Overview
This product should be installed by a professional.
However, if you plan to install this product yourself, your
first step is to decide where to install it. The instructions in
these pages will guide you through the remaining steps:
(Please refer to the "WARNING" statement above).
e Identify and label the car wires.
e Connect the car wires to the wires of the power connec-
tor.
e Install the unit in the dashboard.
e Check the operation of the unit.
If you encounter problems, please consult your nearest
professional installer.
Ca-DP171U
Caution: This unit operates with a 12 V DC negative
ground auto battery system only. Do not attempt to use
it in any other system. Doing so could cause serious
damage.
Before you begin installation, look for the items which are
packed with your unit.
e Warranty Card ... Fill this out promptly.
e Panasonic Servicenter for Service Directory ... Keep
for future reference in case the product needs servicing.
e Installation Hardware ... Needed for in-dash installa-
tion.
Q Required Tools
You'll need a screwdriver, a 1.5 V AA battery, and the fol-
lowing:
12 V DC
Electrical
Test bulb
tape
a
Side-cut
pliers
Q Dashboard Specifications
Thickness
Min. 3/16" (4.75 mm)
pp Max. 7/32" 5 56 ih
AS 2 3/32" (53 mm)
7
a
Le
mm)
Publicidad
