Publicidad
Idiomas disponibles
Idiomas disponibles
M4M
CONTROL PANEL
3
3
5
2
6
7
12
4
8
1 AUDIO INPUTS
6.35 mm jack connectors for line level audio input:
BALANCED left-right balanced (TRS L/R)
Tip = + "hot" positive
Ring = - "cold" negative
Sleeve = shield or ground
UNBALANCED left-right unbalanced (RCA L/R).
Tip = + "hot" positive
Sleeve = shield or ground
2 BACKLIT LOGO
Press this switch to turn on or off the illumination of the logo on the front of the active
speaker (1).
3 BLUETOOTH
:
®
Press this button to activate Bluetooth
gives a visual indication (flashing or steady) of the status of the Bluetooth
1
(see also chapter 6).
4 BASS BOOST
Set the selector switch to ON to boost low frequencies and increase general loudness.
5 MAIN LEVEL
Potentiometer for volume control.
6 POWERED OUTPUT
Connection terminals for connection of the active speaker to the passive speaker using
the 2-core cable supplied. Take care to match up the colours of the wires and terminals
(red wire to red terminal, black wire to black terminal).
7 ON/OFF
Switch to turn the monitor off and on.
8 HEADPHONE OUTPUT
Connect your headphones to this output via a 3.5 mm jack. The headphone output level
is controlled by the Main Level control knob.
9 AUX IN
Auxiliary stereo audio input on 3.5 mm jack connector.
10 SPEAKER 2 CONNECTION TERMINALS
Connect the passive speaker to the active speaker using the 2-core cable supplied
and the + (red) and - (black) terminals. NOTE: Only use the cable provided. The use of
other cables with different length and cross-sections could impair the efficiency of the
system.
9
10
User manual
connection (see also chapter 5). The blue LED
®
connection
®
13
Publicidad
