Cleaning And Care - Mondial BB-05 Manual De Instrucciones Y Servicio Técnico

INTRODUCTION
Thank you for trusting in Mondial. It is the perfect accessory for food lovers. To ensure
proper operation and maintenance of the product, carefully read the instructions in this
manual and keep it in the event that you may need in the future. We recommend that you
also keep the packaging in case of repairs, and dispose of all plastic bags that could
become dangerous toys for children.
The appliance is very easy to use. Just connect it to the electricity supply socket (220-250V).
If you need more information, please contact Mondial.
Advice:
The use of Mondial appliances by children needs clear instructions of use and
constant supervision during use of the appliance.
This water dispenser is capable of simultaneously dispensing hot and cold water
respectively: Hot water is from 85ºC~95ºC (inside heating) or 85º~90ºC (outside heating)
and cold water is from 8ºC~12ºC or 6~10ºC. Supply water can be either 3 or 5 gallons bottle
water or RO-purified water, and dispenser water is suited for a wide variety of needs for
drinking water, making tea, coffee or instant food, etc.
The dispenser can be equipped for both household and institutional facilities indoor such as
school, hotel and commercial offices.
This water dispenser adopts advanced technology, as well as latest techniques of
compressor cooling and electric heating, yielding both highly efficient temperature control
and powerful heating and cooling capacities.
Both the cold and hot tanks are made of high-grade stainless steel, ensuing high durability
and satisfactory hygienic level.
OPERATION
The instrument consists of the following parts, see fig.A:
Before using the appliance:
Unpack the appliance.
˃
Clean the appliance. See "Cleaning and Care"
˃
Use (See fig.A)
Place the dispenser steadily on solid ground, keeping the back surface at least
1.
15cm away from the wall.
2. Ambient space must be dry, clean and well ventilated with temperature desirable
level between 10ºC~38ºC (or 18~43ºC if T climate).
Keep away from precious furniture and other electrical appliance to prevent water
3.
splashing onto these items when inserting the water bottle.
Must use 3-core socket with proper earthling and leak protector as proper power
4.
connection.
12 UK E
5. Set the heating (red) switch to OFF before plugging in the socket.
Keep power off if the machine is not to be used for a period time to prevent
6.
repeated heating which may cause water leak, During extensive unused period
power user must unplug the power socket and open the draining cap to release
residual water. Do not forget to close the draining cap again before use.
Do not open the refrigerator during in working condition.
7.
Water must be observed from the hot tap before turning on the Heating switch (red).
8.
9. WARING – KEEP ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
10. WARNING – Do not damages the refrigerant circuit.
WARNING – Do not uses flammable appliances inside the food storage
11.
compartments of the appliance, unless they are the type recommended by the
manufacturer.
Recommended fixing way of water dispenser:
1. Water dispenser
Wall fix screw
2.
S type fix bracket
3.
4. Water dispenser fix screw
5. The size of S bracket is 40*50*10, the
dia. of screw is 4mm, and the screw is
at center of this bracket.
Correct use of refrigerating cabinet (if has)
1. Wipe and clean the inner walls and bottom tray ensure the inside is completely dry,
and then shut the refrigerator door tight.
The refrigerating system in a water dispenser with bottom refrigerating cabinet
2.
works to control both water-cooling and cabinet refrigerating and can not be used
alone for the refrigerator.
3. Before using the refrigerator, must keep the cabinet running empty for two hours
before storing food Must leave sufficient space between food storage to allow
sufficient air circulation.
Remove residual water accumulated on the bottom tray frequently to prevent cold-
4.
water leakage.

CLEANING AND CARE

All tanks and pipes had received in factory sterilizing treatment, but users are advised to
clean them on a regular basis.
1. Regular cleaning: keep the product heating for 30 minutes, then lift up water
bottle,switch off power source, open draining cap and 2 taps to release residual
UK E 13