2in1 Rechargeable Table Lamp Use instructions
General warnings
Read the following instructions before using the appliance.
Before and during use of the appliance, some basic precautions must
be followed.
After removing all packaging materials, check the integrity of the ap-
pliance. In case of any doubt do not use the appliance and contact
professionally qualified personnel. Packaging materials (plastic bags,
styrofoam, etc.) must always be kept out of the reach of children, as
potential cause of risk.
Always make sure that the mains voltage equals to the voltage in-
dicated on the technical data label and that the electrical system is
compatible with the power of the appliance.
Never unplug the appliance from the socket by pulling the power cord.
Make sure the cable never gets in contact with hot or sharp surfaces.
Do not connect the appliance to the outlet to charge the battery in
case the charging cord is damaged.
If the charging cord is damaged, it must be replaced by the manufac-
turer or by its Technical After Sales service or by a qualified person,
in order to avoid any potential risk.
Only connect the appliance to an AC power outlet.
It is generally not advisable to use adapters, multiple sockets and/or
cord extensions.
When their use is necessary only use adapter and cord extensions
compliant with the applicable safety regulations.
This appliance must only be used for the operation for which it was
expressly designed. Any other use is to be considered incorrect and
thus dangerous, causing the expiration of warranty. The manufactu-
rer cannot be held responsible for any damage caused by incorrect,
improper and unreasonable use.
To avoid dangerous overheating completely unwind the power cord
and unplug the socket from the power outlet when the appliance is
not in use.
Before carrying out any cleaning or maintenance operation, unplug
the socket from the power outlet.
Do not immerse the appliance in water or other liquids.
Keep the appliance away from heating sources (e.g. radiator).
8