HAMPTON BAY MDHC150HB Guía De Uso Y Cuidado página 4

Assembly
1
Attaching the Handle
□ Attach the handle (A) to the hose reel housing (B).
Press down on the handle (A) until you
hear a snap.
B
3
Attaching the Leader Hose
NOTE: When attaching the garden hose to the leader hose to
the In-Tube, be sure to attach correctly, cross threading could
cause permanent damage.
□ Connect the leader hose (F) to the In-tube on the exterior of the hose
reel.
□ Connect the opposite end of the leader hose (F) to the water supply.
□ Do not cross-thread the leader hose into the In-tube.
A
IN-TUBE
2
Attaching the Crank Handle
□ Attach the crank handle (C) onto the crank arm by inserting the
screw (D) through the crank handle (C). Tighten securely using the
Allen wrench (E).
4
Attaching the Garden Hose
NOTE: Check that the garden hose has a washer inside the
female coupler. If the washer is missing, consult your local
hardware store for the correct washer needed.
□ Insert your garden hose between the frame bars and connect to the
Out-tube. Turn on the water supply and check for leaks. If necessary
re-tighten connections.
4
C
D
OUT-TUBE